Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
78.107.69.98    0.0.0.0         255.255.255.255 UH    0      0        0 eth1
78.107.235.4    10.220.8.1      255.255.255.252 UG    0      0        0 eth1
85.21.72.80     10.220.8.1      255.255.255.240 UG    0      0        0 eth1
78.107.51.0     10.220.8.1      255.255.255.240 UG    0      0        0 eth1
83.102.231.32   10.220.8.1      255.255.255.240 UG    0      0        0 eth1
85.21.108.16    10.220.8.1      255.255.255.240 UG    0      0        0 eth1
85.21.138.208   10.220.8.1      255.255.255.240 UG    0      0        0 eth1
83.102.146.96   10.220.8.1      255.255.255.224 UG    0      0        0 eth1
233.32.240.0    10.220.12.235   255.255.255.0   UG    0      0        0 eth1
172.16.16.0     10.220.8.1      255.255.255.0   UG    0      0        0 eth1
85.21.90.0      10.220.8.1      255.255.255.0   UG    0      0        0 eth1
78.107.23.0     10.220.8.1      255.255.255.0   UG    0      0        0 eth1
85.21.79.0      10.220.8.1      255.255.255.0   UG    0      0        0 eth1
10.220.8.0      0.0.0.0         255.255.248.0   U     0      0        0 eth1
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth1
10.0.0.0        10.220.8.1      255.0.0.0       UG    0      0        0 eth1
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo

### BEGIN INFO
#
# Modified_by:  dhcpcd
# Backup:       /etc/resolv.conf.saved.by.dhcpcd.eth1
# Process:      dhcpcd
# Process_id:   2623
# Script:       /sbin/modify_resolvconf
# Saveto:       
# Info:         This is a temporary resolv.conf created by service dhcpcd.
#               The previous file has been saved and will be restored later.
#               
#               If you don't like your resolv.conf to be changed, you
#               can set MODIFY_{RESOLV,NAMED}_CONF_DYNAMICALLY=no. This
#               variables are placed in /etc/sysconfig/network/config.
#               
#               You can also configure service dhcpcd not to modify it.
#               
#               If you don't like dhcpcd to change your nameserver
#               settings
#               then either set DHCLIENT_MODIFY_RESOLV_CONF=no
#               in /etc/sysconfig/network/dhcp, or
#               set MODIFY_RESOLV_CONF_DYNAMICALLY=no in
#               /etc/sysconfig/network/config or (manually) use dhcpcd
#               with -R.  If you only want to keep your searchlist, set
#               DHCLIENT_KEEP_SEARCHLIST=yes in /etc/sysconfig/network/dhcp or
#               (manually) use the -K option.
#
### END INFO
#

search site
nameserver 213.234.192.8
nameserver 85.21.192.3

connect: Network is unreachable