Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
78.107.69.98 0.0.0.0 255.255.255.255 UH 0 0 0 eth1
78.107.235.4 10.220.8.1 255.255.255.252 UG 0 0 0 eth1
85.21.72.80 10.220.8.1 255.255.255.240 UG 0 0 0 eth1
78.107.51.0 10.220.8.1 255.255.255.240 UG 0 0 0 eth1
83.102.231.32 10.220.8.1 255.255.255.240 UG 0 0 0 eth1
85.21.108.16 10.220.8.1 255.255.255.240 UG 0 0 0 eth1
85.21.138.208 10.220.8.1 255.255.255.240 UG 0 0 0 eth1
83.102.146.96 10.220.8.1 255.255.255.224 UG 0 0 0 eth1
233.32.240.0 10.220.12.235 255.255.255.0 UG 0 0 0 eth1
172.16.16.0 10.220.8.1 255.255.255.0 UG 0 0 0 eth1
85.21.90.0 10.220.8.1 255.255.255.0 UG 0 0 0 eth1
78.107.23.0 10.220.8.1 255.255.255.0 UG 0 0 0 eth1
85.21.79.0 10.220.8.1 255.255.255.0 UG 0 0 0 eth1
10.220.8.0 0.0.0.0 255.255.248.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
10.0.0.0 10.220.8.1 255.0.0.0 UG 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
etc/resolf.conf
Код:
### BEGIN INFO
#
# Modified_by: dhcpcd
# Backup: /etc/resolv.conf.saved.by.dhcpcd.eth1
# Process: dhcpcd
# Process_id: 2623
# Script: /sbin/modify_resolvconf
# Saveto:
# Info: This is a temporary resolv.conf created by service dhcpcd.
# The previous file has been saved and will be restored later.
#
# If you don't like your resolv.conf to be changed, you
# can set MODIFY_{RESOLV,NAMED}_CONF_DYNAMICALLY=no. This
# variables are placed in /etc/sysconfig/network/config.
#
# You can also configure service dhcpcd not to modify it.
#
# If you don't like dhcpcd to change your nameserver
# settings
# then either set DHCLIENT_MODIFY_RESOLV_CONF=no
# in /etc/sysconfig/network/dhcp, or
# set MODIFY_RESOLV_CONF_DYNAMICALLY=no in
# /etc/sysconfig/network/config or (manually) use dhcpcd
# with -R. If you only want to keep your searchlist, set
# DHCLIENT_KEEP_SEARCHLIST=yes in /etc/sysconfig/network/dhcp or
# (manually) use the -K option.
#
### END INFO
#
search site
nameserver 213.234.192.8
nameserver 85.21.192.3